Ventilation system with heat recovery via a heat pump is combined with domestic hot water and radiator water heating.
        Recover the wasted energy from the exhaust air, to heat the water. Heated water inside the tank can be supplied to house heating system and sanitary hot water by a stainless steel heat exchanger.
        And some connectors on the water tank for other heating sources : boiler, solar panel, existing heat pump.         Opeation function: ventilation, house heating, sanitary hot water, solar heating.



Installation Types:



        Waste heat is useful:

         Install in places enable direct connection of a heat generator: garages, washing room or boiler rooms.




        Dehumidifying in recirculating air operation:

        dehumidifying air in laundry rooms can be used to dry laundry and prevents damage caused by humidity.




        Cooling in recirculating air operation:

indoor air is drawn out from storage room or wine cellars, for example, via an air duct and is then cooled and dehumidified in the hot water heat pump and blown into the room again. Suitable locations for installation include hobby rooms, furnace rooms and laundry rooms. The air ducting in the heated section of the system should be insulated with water-proof insulation to prevent the formation of condensate.





Heat recovery from return air. Removal of used, humid, charged air from bath, toilet, kitchen. Fresh air enter home by slots.


Model
KP-30N
Rated heating capacity
KW
3.0
Water volume
L
280
Power input(heating)
W
860
Operating corrent
A
4
power supply
V/Ph/Hz
220/1/50
Compressor quantity
1
Compressor type
Rotary
Airflow direction
2-duct.Top discharge
Return temperature
10~50 adjustable
Airflow
m3/h
450/350
Air pressure
pa
60
Duct dimension
mm
150
Noise level
dB(A)
55
Inlet/outlet water pipe connector
DN20
Input power (Electric heating)
mm
1.5
Net dimension(DH)
kw
700 x 1835
Packing dimension(LWH)
mm
780/780/2000
Net weight
kg
105
Gross weight
kg
110